- Model NO.: WTH-W2000
- Maxcapacity: >1000KN
- Load Way: Electronic Load
- Display: Digital
- Weight: >2000Kg
- Trademark: wangtebei
- HS Code: 9024800000
- Type: Universal Testing Machine
- Accuracy Grade: 1
- Loading Method: Static Load
- Control: Computer Control
- Power Source: AC380V
- Origin: China
It is mainly used to do tensile test, compression test, bending test, torsion test, shear test to examine mechanical properties of metal materials, non-metal materials, composite materials and other materials.
1.Stable and reliable loading frame
Loading frame adopts underneath hydraulic cylinder. Main loading parts use high stiff materials and good connecting to reduce inclination angle of crosshead under load, enable very precise alignment and application of force to specimen.
2. Easy and convenient to install and take off specimen
The clamps adopt whole open structure to enable install and take off specimen easity
Using of hand control box to control open and close of clamping jig to effectively install and take off specimen
3. Precise measuring and control system
Bidirectional load cell is used, high precision, stable, and accurate.
High effective and precise servo measuring control system is used to make the machine response as quickly as possible during operation and test and high precise test results(force at break, tensile strength, compression strength, yield point, elongation, etc) are got after test.
4. Extensive applicability
A wide range of grips enables test machines to be used for tests on plastics, elastomers, metals, composites, paper, board, textiles, foams, foodstuffs and components, while the generous test-area depth allows the use of larger fixtures and enables larger components to be tested.
Measuring and control software is full-digital closed loop control with multi-channel, multi-functions and easy to operate.
Load can be hold automatically and control mode of strain control, stress control, cycle control and self-programmed control mode can be achieved. All control modes can be switched very easily.
Test curves can be amplified, compared with each other. More than two kind of test curves can be displayed at the same time.
6. Accord with many test method
Test method of GB, ISO, JIS, ASTM, DIN, BS, EN, etc can be satisfied.
Limit position protection of cylinder
Over flow protection of hydraulic system
Over load protection
Over voltage and over current protection
|2||Accuracy grade||Grade 1|
|5||Accuracy of load||±1%|
|6||Resolution of displacement||0.001mm|
|7||Speed range of stress||1-60(N/mm2)S-1|
|8||Speed range of strain||0.00025/S-0.0025/S|
|9||Max. Tensile space||1000mm(including the length of tensile jaws)|
|10||upper and lower compression plate||200X200mm|
|11||Max. clamping width of flat specimen||70mm|
|12||Clamping thickness of flat specimen||0-40mm|
|13||Clamping diameter of round specimen||Ф12-70mm|
|14||Bending accessories||Support span:800mm|
|15||Extensometer||Gauge length: 50mm|
Min. Reading: 1/1000
|16||Max. Stroke of piston||250mm|
|17||Dim. of main machine||1200 mm×850 mm×2900mm|
|18||Overall Dim. of control cabinet||1130 mm×710 mm×920mm|
|19||Weight of main machine||About 8500kg|