Basic Info.
Type
Tensile Testing Machine
Transport Package
Wood Box for Export
Product Description
Functions and ApplicationsIt is mainly used to do tensile test, compression test, bending testing, torsion test, shear test, etc in room temperature for metal and non-metal materials, composite materials and other materials.It meets with not only Chinese national standard(GB) but also ISO, JIS, ASTM, DIN, BS, etc.Following materials or sample shape (not limited to) can be tested on the machine with its flexible equipmentSheet, panel, strip, foil, flat bar, wire rod, bar, proximate matter, tubular product, slice, square, circle, rectangle and circular ring, cast iron, tabulation sample, proportion sample, non-proportional sample, whole thickness lengthways strip sample, whole thickness crosswise strip sample, rectangle cross section sample, circle cross section sample, etc.Flexible equipment can be used on the machine according to different test method or test standard to do tensile, compression, bending test of various materials like the following(not limited to):1. tensile, compression, bending test to non-metal materials and composite materials such as rubber, plastics, thin films, etc.
2. Property test of various metal, thin metal, wire, filament, fibre, elastomer, foam materials.
3. material performance test for textile, food, medical, cosmetic, biological materials, etc.
4. pull test, peeling test, weld strength test to electronic components.
5. peeling test, bending strength, fastener properties of printed circuit board,
6. non-metal materials test like woodware, paper product, film sample.etc
7. stress relaxation test and adhesive strength test.
CharacteristicsTesting machine adopts high precision gapless ball screw, high stiffness and high stable loading frame. High precision load measuring device, stable and accurateAC servo motor driving system is high speed, low vibration, maintenance-free, and mute.Optoelectronic isolation circuit board, high antijamming capabilityHand control box, easy and convenient to control up and down of cross beam.Test speed:0.001-500mm/minCombination control software can meet with test standard of GB, ISO,JIS, ASTM, DIN, BS, EN,etc.Test procedure auto control, test results can be displayed and saved automatically.Loading keeping functions. Stress control, strain control, load control, displacement control can be selected. Clients can also create test procedures through software. Control mode can be switched freely. Test curves on the software can be enlarged, compared, scanned, etc. Auto return to original position after test.Protection functions: overload protection, over current protection, over voltage protection, protection at breakage,etc.
Technical parameters
1 | Model | WTD-W1/W2/W5 |
2 | Max. capacity | 1000N/2000N/5000N |
3 | Grade | Grade 1 |
4 | Measuring range | 1%-100%FS |
5 | Relative error of indicating value | ±1% |
6 | Force resolution | 1/±300000FS |
7 | Displacement measuring range | 0.2%-100% |
8 | Load speed range | 0.005%-5%FS/s |
9 | Load speed precision | When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5% |
10 | Deformation speed range | 0.005-5%FS/s |
11 | Deformation speed precision | When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5% |
12 | Displacement speed range | 0.001-500mm/min |
13 | Displacement speed precision | Within ±0.2% of set value |
14 | Range of constant load control, constant deformation control, constant displacement control | 0.5%-100%FS |
15 | Precision of constant load control, constant deformation control, constant displacement control | When set value is more than 10%FS, precision is within ±0.5% of set value When set value is less than 10%FS, precision if within ±1% of set value |
16 | Stroke of crossbeam | 1000mm |
17 | Voltage | 220V±10%,50Hz(should connect to the ground) |
18 | Power | 400W |
19 | Dim. Of load frame | 415X415X1650mm |
20 | Over weight of product | 150kg |
Address:
No. 33, Baimashan West Road, Jinan, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters
Company Introduction:
Jinan Wang Te Bei Equipment Co., Ltd is a modernization high-tech corporation, specialize in the field of material testing machine for metal, non-metal and composite materials. Our corporation obtains good reputation among clients because of our high qualified professionals and high efficient services.
We have set sales and technical service center in many provinces and also we have marketing agency overseas like Singapore, Malaysia, Pakistan, India, etc. 35% of our staff is technician, we can design and manufacture most suitable testing machine according to client′s requirements.
Our products include: Electronic universal testing machine, hydraulic universal testing machine, tensile testing machine, compression testing machine, bending testing machine, stiffness testing machine, compression testing machine for brick, concrete, stone, etc, impact testing machine, hardness testing machine, etc.
Our products have been sold to Germany, Spain, South Africa, South Korea, Pakistan, Malaysia, Thailand, Singapore, Canada, UK, etc. We sincerely welcome your visit and hope to cooperate with your esteemed corporation.