- Model NO.: WTH-W
- Maxcapacity: <1000KN
- Load Way: Electronic Load
- Display: Digital
- Weight: >2000Kg
- Oil Cylinder Position: Under
- Max. Capacity: 1000kn
- Tensile Space: 750mm
- Clamping Thickness for Flat Specimen: 0-30mm
- Clamping Mode: Hydraulic Auto Clamp
- Displacement Resolution: 0.001mm
- Transport Package: Wood Box for Export
- Origin: China
- Type: Universal Testing Machine
- Accuracy Grade: 1
- Loading Method: Static Load
- Control: Computer Control
- Power Source: AC380V
- Model: Wth-W1000
- Structure: 4 Columns 2 Screws
- Clamping Width for Flat Specimen: 125mm Max.
- Clamping Diameter of Round Specimen: 13-40mm
- Grade: Grade 1
- Trademark: wangtebei
- Specification: 1000KN
- HS Code: 9024109000
It is mainly used to do tensile test, compression test, bending test, torsion test, shear test to examine mechanical properties of metal materials, non-metal materials, composite materials and other materials.
1.Stable and reliable loading frame
Loading frame adopts underneath hydraulic cylinder. Main loading parts use high stiff materials and good connecting to reduce inclination angle of crosshead under load, enable very precise alignment and application of force to specimen.
2. Easy and convenient to install and take off specimen
The clamps adopt whole open structure to enable install and take off specimen easity
Using of hand control box to control open and close of clamping jig to effectively install and take off specimen
3. Precise measuring and control system
Bidirectional load cell is used, high precision, stable, and accurate.
High effective and precise servo measuring control system is used to make the machine response as quickly as possible during operation and test and high precise test results(force at break, tensile strength, compression strength, yield point, elongation, etc) are got after test.
4. Extensive applicability
A wide range of grips enables test machines to be used for tests on plastics, elastomers, metals, composites, paper, board, textiles, foams, foodstuffs and components, while the generous test-area depth allows the use of larger fixtures and enables larger components to be tested.
Measuring and control software is full-digital closed loop control with multi-channel, multi-functions and easy to operate.
Load can be hold automatically and control mode of strain control, stress control, cycle control and self-programmed control mode can be achieved. All control modes can be switched very easily.
Test curves can be amplified, compared with each other. More than two kind of test curves can be displayed at the same time.
6. Accord with many test method
Test method of GB, ISO, JIS, ASTM, DIN, BS, EN, etc can be satisfied.
Limit position protection of cylinder
Over flow protection of hydraulic system
Over load protection
Over voltage and over current protection
|Structure||4 columns 2 screws|
|Clamping width for flat specimen||75mm|
|Clamping thickness for flat specimen||0-30mm|
|Clamping diameter of round specimen||13-40mm|
|Clamping mode||Hydraulic auto clamp|
|Loading measuring range||2%-100%FS|
|relative error of indicating force value||±1%|
|range of stress rate||1Mpa/s-60Mpa/s|
|Precision of stress rate||±1%|
|Relative error of deformation||±1%|
|Deformation measuring range||1%-100%|
|range of strain rate||0.00025/s-0.0025/s|
|Precision of strain rate||±1%|
|relative error of displacement||±1%|
|range of displacement rate||0.00025/s-0.0025/s|
|Precision of displacement rate||±1%|
|range of stress control, strain control, displacement control||0.3%-100%FS|
|Precision of stress control, strain control, displacement control||±1%|